INTELLIFLO
®
VS+SVRS and INTELLIPRO
®
VS+SVRS Variable Speed Pump Installation and User’s Guide
vi
Pentair Aquatic Systems
IMPORTANT SAFETY INSTRUCTIONS
Warnings and safety instructions for Pentair Aquatic Systems pumps and other related products are
available at: http://www.pentairpool.com/pool-owner/safety-warnings/ Call (800) 831-7133 for
additional free copies of these instructions. Please refer to www.pentairpool.com for more information
related to Pentair Aquatic Systems pumps.
For Installation of Electrical Controls at Equipment Pad
(ON/OFF Switches, Timers and Automation Load Center)
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Install all electrical controls at equipment pad, such as on/
off switches, timers, and control systems, etc. to allow the
operation (startup, shut-down, or servicing) of any pump
or filter so the user does not place any portion of his/her
body over or near the pump strainer lid, filter lid or valve
closures. This installation should allow the user enough
space to stand clear of the filter and pump during system
start-up, shut down or servicing of the system filter.
HAZARDOUS PRESSURE: STAND CLEAR OF PUMP AND FILTER DURING START-UP
To Next Page
Loading...
Need help?
General
