Pentair Kreepy Krauly Prowler 930 - Preparation of the Pool and Cleaner; Cleaner Features; Initial Setup; Caddy Assembly

1
KREEPY KRAULY
®
PROWLER
®
930 Robotic Inground Pool Cleaner Installation and User’s Guide
Overview
Prowler
®
930 Robotic Pool Cleaners are designed to scrub, vacuum, and filter (including the waterline) your inground
pool. Before operating this product, be sure to read and follow all warning and safety instructions on pages ii-iii.
Cleaner Components:
• Cleaner with 60 ft. Communication Cable
• Power Supply
• Cleaner Caddy
Cleaner Features:
• Weekly Timer
• Wall and Waterline Scrubbing
• Top Loading Basket Filtration
• Delayed Start
• Quick Clean
• Bluetooth
®
Wireless Technology Connectivity
• “Prowler 930” Mobile App for Smartphones
PREPARATION OF THE POOL AND CLEANER
Cleaner with 60’
Communication Cable
Power Supply
Cleaner Caddy
STEP 1:
Power Supply and Caddy Placement
The cleaner comes with a cleaner caddy that will need to
be assembled before continuing further into this section.
See page 3 for Caddy Assembly instructions.
Position the caddy and power supply at least 10 feet (3 m)
from the edge of the pool. See Figure 1.
STEP 2:
Unroll Communication Cable
Unroll the communication cable and stretch it out
completely so that is has no kinks. See Figure 2.
Initial Setup
Before using the cleaner for the first time, perform the following procedures:
Figure 2
3m/10ft
Figure 1