PROWLER P10 & P20 Robotic Inground Pool Cleaner Installation and User’s Guide
English
6
Starting the Robotic Cleaner using the App
1. Download and install the Application from Google Play or App Store. Use the QR code at the bottom of the next page.
2. Open the App.
3. Open Bluetooth option on your phone.
4. The APP will present the discovered robots in its range (RoboCleaner xxxxxx).
5. Tap on robot’s name. The APP will connect to your power supply. The Bluetooth icon on the power supply unit
will light up to indicate correct match.
6. To activate the cleaner, tap the On/off icon on the App.
USING THE APP
Language: Choose your preferred
interface language.
non-contractual image
Information: Shows information
about your Robotic Cleaner. Pull
down to refresh the readings.
Remote Control: Hold down
the RIGHT or LEFT icons to turn
the robot. Use single-tap on the
CHANGE DIRECTION Icon to
change the driving direction of
the pool Cleaner.
To Next Page
Loading...
