EasyManua.ls Logo

Pentair PROWLER P10 - Starting, Stopping, and Bluetooth

Pentair PROWLER P10
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROWLER P10 & P20 Robotic Inground Pool Cleaner Installation and Users Guide
English
4
Starting the robotic cleaner
Connect the power supply to the wall socket. The on/off button will lit and the robotic cleaner will start its cleaning
program. If the power supply is already connected to the wall socket, the on/off button will ash to indicate that the
robotic cleaner is in standby mode. Press the On/Off button in order to change the above mode (On to Off – standby,
or vice versa). Note: if the full lter indication light is ON make sure to remove and clean the lter prior to putting
the cleaner inside the pool water.
Cleaning cycle
During the cleaning cycle, the cleaner: (1) moves across the pool oor picking up dirt and debris. (2) Changes
direction and rotates automatically according to the selected program. (3) Climbs the pool walls every few minutes,
as set in its internal program. Note: The robotic cleaner might occasionally stop moving for a few seconds. This is
part of normal operation, not a malfunction.
Stopping robotic cleaner operation
The robotic cleaner moves automatically to standbyafter every cleaning cycle and the on/off button starts ashing.
To stop the cleaner operation during a cleaning cycle, press the operation button once. On/off button starts ashing
and the cleaner is in standby mode.
Pulling cleaner unit out of the water
(1) Unplug the oating cable from the power supply. (2) Pull the oating cable until the unit is close enough to reach
the handle. (3) Using the handle, lift the cleaner out of the pool.
Bluetooth connection
The Prowler P20 model has the option of being connected to a bluetooth application, Scan the QR code in page 7
to access the App Store or Google Play When the application is installed and opened, it will start automatically to
scan to see if it can nd a robot that works within Bluetooth range.
CAUTION: Do not use the oating cable
to lift the cleaner out of the water.
OPERATION
Power Supply
Prowler P10
Power Supply
Prowler P20
On/Off
On/Off
Full lter
indicator
Bluetooth

Table of Contents

Related product manuals