Need help?Do you have a question about the Pentair STA-RITE HMS-1FL Series and is the answer not in the manual?
General| Series | STA-RITE HMS-1FL |
|---|---|
| Category | Water Pump |
| Type | Self-Priming Centrifugal Pump |
| Horsepower | 1 HP |
| Voltage | 115/230V |
| Phase | Single Phase |
| Outlet Size | 1 inch |
| Material | Cast Iron |
| Port Size | 1.25 inches |
| Inlet Size | 1.25 inches |
Provides instructions and safety warnings for installing pumps in deep well systems.
Details the process for shallow well installations, including check valve recommendations.
Step-by-step procedure for priming a deep well pump, including pressure gauge settings.
Instructions for priming a shallow well pump, emphasizing filling with water before starting.
Guidance on draining the pump for winter to prevent damage from freezing.
How to select between 115V and 230V for dual-voltage motors using plugs or dials.
Steps to change voltage using the plug type selector, covering 230V to 115V conversion.
Steps to change voltage using the dial type selector, covering 230V to 115V conversion.
Safety and procedural advice for pump wiring, including grounding and code compliance.
Detailed steps for making secure electrical connections, including pressure switch wiring.
To Next Page