Diaphragm Valve Face Piping Kit Installation Manual Pg. 35 of 52
5/31/12 Rev. F
3.5 Backwash Controller (CS400) - Single Tank Installation
The single tank backwash controller kit (CS400) consists of the following:
(1) CS400 backwash controller
enclosure
(2) 3/8” OD tube quick connect tees
(3) 3/8” OD x ¼” MNPT quick
connect fittings
(1) Check valve w/ fittings
(100 ft) 3/8” OD polyethylene tube
(2pr.) Mounting brackets and
hardware
(1) Owner’s/Operator’s manual for
CS400 backwash controller
Verify that all parts listed above were supplied before beginning installation. Replacement parts
can be ordered through a Stark distributor.
To Next Page
Loading...
