77420 - 18/107 -
15．Removing 0-A101 (Front housing assy.)
①Set the mirror seat top position before removing G100.
Apply DC 2V to 0-S250 and set the mirror seat at top position. (Red lead wire with +)
②Unscrew TY-CNM2.0x5.0 x5
③0-A101
16. Removing A13 and related parts
①Unscrew TY-CNL-D1.7x4.0 x2
②A13 and related parts
17. Removing E100 (Shutter block)
①Unscrew A70 x3
②E100
③Master plate (Not supply）
②
To Next Page
Loading...
