225
7
Playback Functions
4
Turn the AV device and camera on.
The camera turns on in video mode, and the camera information is
displayed on the screen of the connected AV device.
When the hometown is set at the time of initial setting (p.60), the video
output format is set in accordance with that region. Depending on the
country or region, images may fail to be played back with the set video
output format. If this happens, change the video output format setting.
1
Select [Video Out] in the [R Set-up 2] menu and press the
four-way controller (5).
2
Use the four-way controller (23)
to select [NTSC] or [PAL] and
press the 4 button.
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Even if you used an external microphone to record movie sound in stereo,
monaural sound is played back.
Selecting the Video Output Format
The video output format differs depending on the region. When you set [Setting
the Time] in the World Time setting (p.253) to X (Destination), the video output
setting changes to the video output format for that city. Refer to “List of World
Time Cities” (p.255) for cities that can be selected as a hometown or
destination.
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name Date
Create New Folder
Cancel OK
OK
MENU
1 2 34
±0
MSC
PAL
NTSC
To Next Page
Loading...
Need help?
General
