EasyManuals Logo

Pentax K-5II User Manual

Pentax K-5II
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
170
Using the Flash
5
By using two external flashes (AF540FGZ or AF360FGZ) or using the
built-in flash with one or more external flashes, you can shoot in P-TTL
flash mode without connecting the flash units with a cord.
First, set the channel for the external flash unit.
1
Set the channel for the external flash unit.
2
Remove the cover of the hot shoe and attach the external
flash.
3
Turn on the camera and the external flash, and press the
shutter release button halfway.
The built-in flash is set to the same channel as the external flash unit.
Using Flash in Wireless Mode
• Set the power switch of the external flash to WIRELESS.
• Two or more AF540FGZ/AF360FGZ external flashes are required to use
high-speed flash sync in wireless mode. This function cannot be used in
combination with the built-in flash.
• Set the wireless mode of the external flashes not directly connected to the
camera to SLAVE.
Setting the Channel for the External Flash
Be sure to set all the flashes to the same channel. Refer to the manual of the
AF540FGZ or AF360FGZ for details on how to set the channel on the external
flash.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax K-5II and is the answer not in the manual?

Pentax K-5II Specifications

General IconGeneral
BrandPentax
ModelK-5II
CategoryDigital Camera
LanguageEnglish

Related product manuals