263
Changing Additional Settings
9
Setting the Folder/File Number
You can select a naming system of the folder for storing images.
Set in [Folder Name] in the [R Set-up 2] menu.
Creates a new folder on an SD Memory Card. A folder is created with the
number following the number of the folder currently being used.
1
Select [Create New Folder] in the [R Set-up 2] menu and
press the four-way controller (5).
The [Create New Folder] screen appears.
2
Press the four-way controller (2)
to select [Create folder] and
press the 4 button.
A folder with a new number is created.
Changing the Naming System of the Folder
Date
The two digits of the month and day on which the picture was taken are
assigned as the folder name in the form of [xxx_MMDD]. [xxx] is a sequential
number from 100 to 999. [MMDD] (month and day) appears according to the
display style set in [Date Adjustment] (p.253). (default setting)
Example) 101_0125: Folder for images taken on January 25th
PENTX
The folder name is assigned in the form of [xxxPENTX].
Example) 101PENTX
When the number of storable images exceeds 500, captured images are
divided into folders of 500 images each. However, in Auto Bracketing shooting,
images will be stored in the same folder until shooting is completed, even if the
number of images exceeds 500.
Creating New Folders
Create New Folder
Cancel
Create folder
Creates a new storage folder
with the following name:
101 PENTX
OK
OK
To Next Page
Loading...
Need help?
General
