273
Changing Additional Settings
9
Correcting Defective Pixels in the
CMOS Sensor (Pixel Mapping)
Pixel Mapping is a function for mapping out and correcting defective pixels
in the CMOS sensor.
1
Select [Pixel Mapping] in the [R Set-up 4] menu and press
the four-way controller (5).
The [Pixel Mapping] screen appears.
2
Press the four-way controller (2) to select [Pixel Mapping]
and press the 4 button.
Defective pixels are mapped out and corrected, and the screen that was
displayed before selecting the menu appears again.
When the battery level is low, the message [Not enough battery power
remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC
adapter kit (optional) or change to the battery with ample power remaining.
To Next Page
Loading...
