238
8
Processing Images
Developing RAW Images
You can convert captured RAW images into JPEG or TIFF images.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development) and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a Single
Image] and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
If there are no images that can be
processed, [No image can be processed] appears.
Only RAW images captured with this camera can be edited. RAW images and
JPEG images captured with other cameras cannot be edited on this camera.
Developing One RAW Image
MENU
OK
Developing Multiple Images
Developing a Single Image
OK
To Next Page
Loading...
