65
Playback/Erasing
c Turn the camera off, and connect the PC and camera
using an USB cable.
v Turn the camera on.
The [Add New Hardware Wizard] screen will appear.
b Click [Next].
n Make sure that [Search for the best driver for your device
[Recommended] is selected and click [Next].
m Make sure that [CD-ROM drive] is checked and click
[Next].
[PENTAX USB DISK Device] will appear.
, Click [Next].
[Windows has finished installing the software that your new
hardware device requires.] will appear.
. Click [Finish].
To Next Page
Loading...
