76
Settings
How to recall the [Set-up] menu
Changing the Display Language
You can change the language in which the menus, error mes-
sages, etc. are displayed.
z Select [Language] on the [Set-up] menu.
x Use the four-way controller ( ) to change the lan-
guage.
c Press the OK button.
The camera is ready to take or play back images.
Changing the Video Output Format
You can select the output format (NTSC or PAL) for taking or play-
ing back images on a TV monitor.
z Select [Video Out] on the [Set-up] menu.
x Use the four-way controller ( ) to change the video
output format.
c Press the OK button.
The camera is ready to take or play back images.
The appropriate format for the language specified in the initial set-
tings is automatically set.
To Next Page
Loading...
