Pentax Optio 50 - Page 50

EN-50
Step Procedure
Figure
3
4
5
Use W or X to select the image you want to print, then press T to set more
detailed settings.
Use S or T to select by your preference, then press the button.
[ ] : Specifies the number of prints. You can select the number
up to 10.
[Date]: If you select [With], images are printed with the date.
[File Name]: If you select [With], images are printed with the file name.
[Cancel]: To cancel the print settings, use S or T to select [Cancel].
After the step 4 is finished, you can still use W or X to change the image
by your preference, then press the button to print.
Use S or T to access the paper selection setting, then press the
button to confirm.
[Size]: You may select the desired item depending on the type of
printer being used.
[Borderless]:You may select the desired item depending on the type of
printer being used.
2
Borderless
Paper Setting
Standard
Select :
OK :
Size
Standard
Date
Print Info
Print Info
8
Select :
OK :
With
With
File Name
File Name
With
With
Cancel
Select :
Cancel :
Print :
OK
Info. :
100-0008
Select :
Cancel :
Print :
OK
Info. :
100-0009