Pentax Optio 50L - Adjusting the Exposure (EV Compensation)

EN-35
Adjusting the Exposure (EV Compensation)
You can manually adjust the exposure determined by the digital camera. Use this mode when the proper
exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas)
between the subject and the background is extremely high. The EV compensation value can be set in the
range from -2.0EV to +2.0EV.
1. Rotate the mode dial to , , , or .
2. Press the Power switch to turn on the power.
3. Press the MENU button, then use the four-way controller (X) to
select the [Mode3] menu.
4. Use the four-way controller (T) to select [EV Comp.], then use the
four-way controller (WX) to set the range of EV compensation
value from -2.0EV to +2.0EV.
5. To exit the menu, press the MENU button.
OK :
Exit :
Mode1
Mode1
Mode2
Mode2
Mode3
Mode3
EV Comp.
White Bal.
White Bal.
Sensitivity
Sensitivity
0.0
0.0
Auto
Auto
1 / 3
1 / 3
Auto
Auto
MENU