Pentax Optio 50L - Setting White Balance

EN-36
Setting White Balance
This feature lets you make adjustments to compensate for different lighting types according to your shooting
conditions.
1. Rotate the mode dial to , , , or .
2. Press the Power switch to turn on the power.
3. Press the MENU button, then toggle the four-way controller (T) to
select the [Mode3] menu.
4. Use the four-way controller (T) to select [White Bal.], then press
the button.
5. Use the four-way controller (ST) to select the desired setting,
then press the button to confirm.
6. To exit the menu, press the MENU button.
OK :
Exit :
Mode1 Mode2 Mode3
EV Comp.
White Bal.
Sensitivity
0.0
Auto
2 / 3
Auto
MENU
OK :
Exit :
White Bal.
Auto
Daylight
Cloudy
1 / 5
Tungsten
MENU
OK :
Exit :
White Bal.
5 / 5
Fluorescent
MENU