39
1
Getting Started
6 Press the four-way controller (3).
The frame moves to [Date].
7 Press the four-way controller (5).
The frame moves to the month.
8 Use the four-way controller (23)
to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in Step 4, the setting
switches between am and pm corresponding to the time.
9 Press the 4 button.
The camera is ready to take pictures.
Language, Date, Time, Hometown, and DST can be changed. Refer to the
pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.158).
• To change the date and time, follow the steps in “Changing the Date and Time”
(1p.150).
• To change the city or turn DST on and off, follow the steps in “Setting the World
Time” (1p.156).
When the Initial Setting or Date Adjust screen is displayed, you can
cancel the setting operation and switch to Capture mode by pressing
the 3 button. In this case, the Initial Setting screen will appear
next time you turn the camera on.
When you finish the settings and press the 4 button, the camera
clock is reset to 00 seconds. To set the exact time, press the 4
button when the time signal (on the TV, radio, etc.) reaches 00
seconds.
The video output format is set to the format of the country or region selected in
[Language/ ] on the Initial Setting screen. You can change the setting.
(p.161)
Date Adjust
MENU
Cancel
Date Style mm dd yy
Date 01/01/2005
Time
0:00
OK
OK
//
24h
Date Adjust
MENU
Cancel
Date Style mm dd yy
Date 01/01/2005
Time
0:00
OK
OK
//
24h
To Next Page
Loading...
Need help?
General
