70
4
Taking Pictures
B
This camera has been proven to comply with JIS Class 8 waterproof
performance and can be used to take pictures at a depth of 1.5 m
continuously for 30 minutes. In addition, this camera complies with JIS
Class 5 dustproof performance (IP58).
Use the Underwater mode to take underwater pictures that capture the
blueness of the sea.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select B
(Underwater).
3 Press the 4 button.
The Underwater mode is selected and the camera returns to capture
status.
4 Press the shutter release button halfway.
The focus frame turns green if the subject is in focus.
5 Press the shutter release button fully.
The picture is taken.
Taking Underwater Pictures (Underwater Mode)
• Before taking pictures underwater, make sure that there is no dirt
or sand on the waterproof packing of the battery/card cover and
check that the cover is securely locked. (p.23)
• Before opening the battery/card cover after using the camera
underwater, make sure that there is no water, dirt or sand on the
battery/card cover or anywhere on the camera. Wipe the camera
before opening the cover.
Waterproof and Dustproof Function 1p.5
4, 5
1, 2
3
To Next Page
Loading...
Need help?
General
