Pentax OPTIO S - Page 101

99
Playback/Erasing/Editing
Installing the ACDSee™
When installing the ACDSee™, recorded images can be viewed
and edited on your computer.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
 If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
Double click your applicable language.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
v
Click the [USB Driver].
The Setup screen will appear. Follow the on-screen guid-
ance and enter the registration information. Reboot your PC
after installation finish.
Installing the ACD Photostitcher
If you have installed ACDSee™ and ACD Photostitcher in your
computer, you can join the images you have taken in Panorama
assist mode.
Make sure that the ACDSee™ has been installed.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
 If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
Double click your applicable language.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
v
Click the [ACD Photostitcher].
The Setup screen will appear. Follow the on-screen guid-
ance and enter the registration information.
The screen will return to PENTAX Software Installer. Click
the [Exit] to finish.
Downloaded From camera-usermanual.com Pentax Manuals