Pentax OPTIO S - Image Appearance Settings

47
Taking Pictures
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the sur-
roundings.
 Sensitivity
z
Select [Sensitivity] on the [ Rec.Mode] menu.
x
Use the four-way controller ()
to select the sensitivity.
c
Press the OK button.
The camera is ready to take the
picture.
Saving the Sensitivity
☞
p.74
z
xc
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
Multiple
Auto
AE Metering
Sensitivity
AWB
2048 1556
Exit
1/3
Ok
OK
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
Multiple
Auto
AE Metering
Sensitivity
AWB
2048 1556
Exit
1/3
Ok
OK
MENU
Auto
The camera sets the sensitivity automatically.
100
200
• The lower the sensitivity, the sharper the image and the less
noise. The shutter speed will be slower in low light conditions.
• The higher the sensitivity, the faster the shutter speed in low
light conditions to reduce camera shake, but the image may
be affected by noise.
50
Downloaded From camera-usermanual.com Pentax Manuals