Viewing Images with your Macintosh
By using the provided USB cable (I-USB7) or card reader and
image-browser software, you can transfer images recorded with
the camera to your Macintosh and edit them or print them out.
This section explains how to view images on your Macintosh
using the provided software (S-SW8).
About the included software
The included CD-ROM (S-SW8) contains the following software:
• USB driver
• Image viewing software (ACDSee™)
System environment
OS: Mac OS 8.6 or later (QuickTime 4.0 or later required)
CPU: Power PC 266MHz or higher
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
• When you connect the camera to your Macintosh, you
are recommended to use the AC adapter D-AC8. If the
battery power runs out while image data is being trans-
ferred, the data may be lost.
To Next Page
Loading...
