Pentax OPTIO S - Using Camera Buttons and Menus

27
Quick Start
Viewing images on a PC
Once you have installed the USB driver on your PC, you can view
recorded images and edit them on your PC just by connecting the
camera to the PC with the USB cable and downloading the images.
Or you can remove the SD Memory Card/MultiMediaCard from the
camera and transfer the data to your PC using a card reader. If you
use a laptop computer, you can transfer the image data by fitting
the SD Memory Card/MultiMediaCard into the card adapter and
inserting the card adapter into the card slot. (To remove the
SD Memory Card/MultiMediaCard from the camera and transfer
images using another device, refer to the operating manual for the
device.)
Viewing Images with your PC
☞
p.96
Viewing Images with your Macintosh
☞
p.106
Printing images by a printing service
Prints of images recorded on the SD Memory Card/MultiMediaCard
can be ordered in the same way as with conventional photographs
by taking the SD Memory Card/MultiMediaCard to a store that
performs printing.
The number of prints can be specified and dates can be included in
the prints if DPOF (Digital Print Order Format) is set before taking
the SD Memory Card/MultiMediaCard to a store that performs
DPOF printing.
Setting the Printing Service
☞
p.89
Downloaded From camera-usermanual.com Pentax Manuals