18
© 2010 PeopleNet Communications. All rights reserved.
g3 Firmware Download Process
g3 Firmware Download Process
This process updates the g3 firmware to be compatible with the TABLET.
1. Insert the provided fuses to power up TABLET and the g3.
• If the onboard computer (OBC) has the correct code, TABLET will move directly to Process
Installation for synchronization (see “TABLET-OBC Synchronization Process” on page 20).
• If the OBC needs a firmware update, the PeopleNet Download Utility will automatically launch and
will ask you, “….Would you like to update the OBC?”
2. Press Yes to continue.
The download will begin and last about 7-10 minutes.
The screen will display “Download Complete” as each software packet is successfully downloaded.
The download will not be completed until the screen displays “OBC Upgrade Successful.”
3. Press “OK” and proceed to “TABLET-OBC Synchronization Process” on page 20 for synchronization.
To Next Page
Loading...
