peplink 1350 - 21.9 Reboot; 22 Tools; 22.1 Ping Test

To Next Page

To Previous Page

USER MANUAL

Peplink Balance Series

21.9 Reboot

This page provides a Reboot button for restarting the system.

For highest reliability, Peplink Balance series are equipped with two copies of firmware of different version.

You can select the firmware version you would like the device to reboot with.

The firmware marked with (Running) is the current system boot up firmware.

Please note that a firmware upgrade will always replace the inactive firmware partition.

22 Tools

22.1 Ping Test

The Ping Test tool in Peplink Balance performs Pings through a specified Ethernet interface or a

SpeedFusion

VPN connection (VPN connections are only available on Peplink Balance 210 or above).

You can specify the number of pings in the fieldNumber of timesto a maximum of 10 times, and Packet

Size can be specified in the fieldPacket Size to a maximum of 1472 bytes.

The Ping utility is located at System> Tools > Ping, illustrated as follows:

Related product manuals