peplink 1350 User Manual

USER MANUAL
Peplink Balance Series
12.3 SpeedFusion
TM
Status
SpeedFusion
TM
Status is shown in the Dashboard. The connection status of each connection profile is
shownas below.
SpeedFusion
TM
connection status is also shown on the LCD panel of Peplink Balance 380, 580, 710,
1350 and 2500.
By clicking the Details button at the top-right hand corner of SpeedFusion
TM
table, you will be forwarded
to Status >SpeedFusion
TM
. You can view the subnet and WAN connection information of each VPN
peer.Please refer to section 23.6for details.
IP subnets must be unique among VPN peers
The entire inter-connected SpeedFusion
TM
network is one single non-NAT IP network. No two subnets in two sites
shall be duplicated. Otherwise, connectivity problems will be experienced in accessing those subnets.
http://www.peplink.com -80 / 207 - Copyright © 2013 Peplink

peplink 1350 Specifications

General

Brand	peplink
Model	1350
Category	Network Router
Language	English