peplink 1350 - 11 Configuration of WAN Interface(s)

To Next Page

To Previous Page

USER MANUAL

Peplink Balance Series

11 Configuration of WAN Interface(s)

The WAN interface settings are located at: Network> Interfaces > WAN

By clicking a connection name,connection settings of that WAN can be modified.

The connection method and details are determined by, and can be obtained from, the ISP.

Connection Settings

WAN Connection

Name

This field is for defining a name to represent this WAN connection.

Enable

This field is for choosing whether to enable this WAN connection.

Connection Method

This option allows you to select the connection method for this WAN connection. Available

options are:

1. DHCP

2. Static IP

3. PPPoE

4. Mobile Internet Connection

See Sections 11.1.1, 11.1.2, 11.1.3 and11.1.4 for configuration details of each connection

method.

Routing Mode

This field shows that NAT (Network Address Translation) will be applied to the traffic

routing over this WAN connection. IP Forwarding is also available when you click the link

in the help text. For further details, please refer to Appendix B, Routing under DHCP,

Related product manuals