peplink PEPWAVE HD Dome Pro - UBR Plus

2.41 UBR Plus
2.41.1 Panel Appearance
2.41.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Status Indicators
Status
OFF
System initializing
Red
Booting up or busy
Blinking Red
Boot up error
Green
Ready
LAN and Ethernet WAN Ports
Green LED
ON
1000 Mbps
OFF
10 Mbps / 100 Mbps or port is not connected
Orange LED
ON
Port is connected without traffic
Blinking
Data is transferring
OFF
No data is being transferred or port is not connected
Port Type
Auto MDI/MDI-X ports
Cellular Indicators
Cellular
OFF
Disabled or no SIM card inserted
https://www.peplink.com
73
Copyright @ 2021 Peplink