2.18 MAX HD2/4 MBX (CAT-20)
2.18.1 Panel Appearance
Note:
- For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna
connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached.
- The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of
Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the
section 25.4
2.18.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
To Next Page
Loading...
