Dynamic DNS Settings
Dynamic DNS
This setting specifies the dynamic DNS service provider to be used for the
WAN based on supported dynamic DNS service providers:
● changeip.com
● dyndns.org
● no-ip.org
● tzo.com
● DNS-O-Matic
● Others…
Support custom Dynamic DNS servers by entering its URL.
Works with any service compatible with DynDNS API.
Select Disabled to disable this feature.
Account Name /
Email Address
This setting specifies the registered user name for the dynamic DNS service.
Password / TZO
Key
This setting specifies the password for the dynamic DNS service.
Hosts / Domain
This field allows you to specify a list of host names or domains to be
associated with the public Internet IP address of the WAN connection. If you
need to enter more than one host, use a carriage return to separate them.
Important Note
In order to use dynamic DNS services, appropriate host name registration(s) and a valid account with a
supported dynamic DNS service provider are required. A dynamic DNS update is performed whenever
a WAN’s IP address changes (e.g., the IP is changed after a DHCP IP refresh, reconnection, etc.). Due
to dynamic DNS service providers’ policy, a dynamic DNS host will automatically expire if the host
record has not been updated for a long time. Therefore the Pepwave router performs an update every
23 days, even if a WAN’s IP address has not changed.
To Next Page
Loading...
Need help?
General
