Pepperl+Fuchs IVI-KHA6-4HRX - Page 21

IDENT-I • IVI-KHA6-4HRX, IVI-KHD2-4HRX
Commands
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
P
epperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Date of issue 27.08.2001
19
In binary mode there is no decimal conversion. The read-head number is transferred
in bits 4 and 5 of the first byte. The two most significant bits, 6 and 7 are set to 0.
x x x x contains the first 4 bits of the code.
The following byte sequence is output:
To save time, no <CR> <LF> is sent.
Bit 7 6 5 4 3 2 1 0
0000xxxx
Read head 1
0001xxxx
Read head 2
0010xxxx
Read head 3
0011xxxx
Read head 4
Hex 2A 01 1C 3E
Dez 42 1 28 62
Read head number