Pepwave AP One User Manual

User Manual
http://www.pepwave.com
29
Copyright © 2015 Pepwave
RADIUS Server Settings
Host
Enter the IP address of the primary RADIUS server and, if applicable, the secondary
RADIUS server.
Secret
Enter the RADIUS shared secret for the primary server and, if applicable, the secondary
RADIUS server.
Authentication
Port
Enter the UDP authentication port(s) used by your RADIUS server(s) or click the
Default button to enter 1812.
Accounting Port
Enter the UDP accounting port(s) used by your RADIUS server(s) or click the Default
button to enter 1813.
Maximum
Retransmission
Enter the maximum number of allowed retransmissions.
RADIUS Request
Interval
Enter a value in seconds to limit RADIUS request frequency. Note the initial value will
double on each retransmission.

Pepwave AP One Specifications

General

Brand	Pepwave
Model	AP One
Category	Wireless Access Point
Language	English