11Instructions for Assembly and Use – Standard Configuration
MULTIPROP Slab Props
A4 Foreseeable misapplications
Do not use with Tilting Forkhead
MKK or Tilting Base MKF!
Fig. A4.05
Use designated support equipment,
e.g. Push-Pull Props or Brace Frames.
Do not use for supporting formwork
elements!
Fig. A4.06
If the clear height is too large, a longer
slab prop or shoring tower must be
used, e.g. MULTIPROP System with
MRK Frames.
Do not connect the slab props to
each other!
Fig. A4.04
Applications of this type or similar are prohibited!
EX_AuV_MULTIPROP_MP_Deckenstutzen.indb 11 24.03.16 15:10
To Next Page
Loading...
