Peri MULTIPROP MP 120 - Default Chapter; Table of Contents

Introduction
Overview, main components 1
Standard configuration 2
Intended use 2
Safety instructions 3
General 3
Standard configuration
A1 Assembly
Pre-assembling the slab prop 4
Assembly with Universal Tripod 6
A2 Dismantling
Releasing the slab prop under load 7
A3 Accessories
Brace Clamp 8
Base MP 50 9
A4 Foreseeable misapplications 10
A5 Storage and Transportation 13
Tables
Permissible prop loads
MULTIPROP MP 120, 250, 350, 480, 625 14
MULTIPROP MP 120, 250, 350, 480,
625 with Base MP 50 15
Components
Components 16
Instructions for Assembly and Use – Standard Configuration
MULTIPROP Slab Props
Content
Key
Safety in-
structions Note
Visual check
Tip
Load-bearing
point
EX_AuV_MULTIPROP_MP_Deckenstutzen.indb 1 24.03.16 15:10