PerkinElmer Lambda 1050 Getting Started Guide

Installing your Lambda Spectrometer . 45
4. Click Next.
The Select Instrument Type page is displayed.
5. Select the instrument type from the drop-down list and, if required, select Make this
the default instrument.
6. Click Next.
The Setup Communications page is displayed.
7. From the drop-down list, select the Port the instrument is connected to.
In most cases, this will be the highest COM port number in the list, because when you
connect the instrument for the first time, the software configures the next available
port.

PerkinElmer Lambda 1050 Specifications

General

Brand	PerkinElmer
Model	Lambda 1050
Category	Laboratory Equipment
Language	English