UV Express Software 57
▶ Washing Time after Sampling (sec)
To clean the tube & flow cell after the measurement, you need to set the washing
time.
▶ Download:
After all set-up, Click Download before measurement.
▶ Run: Click Run to check if the peristaltic pump is working as set.
▶ Stop: Stop the 'Run' test of peristaltic pump.
9. Click Download after setting the parameter and then the following box appears. Click
OK.
NOTE:
Click Download again when the parameter is changed or COM Port No. is set newly
.
10. Click OK.
To Next Page
Loading...
Need help?
General
