09931286E
15
d. Once draining is complete, turn off the power of Peltier Controller.
Setting USB to RS-232 Cable
NOTE:
When using the RS-232 cable, the COM Port is set automatically.
When using the USB to RS-232 cable, USB to RS-232 Driver has already been installed when installing
the Lambda 365 and UV Express software, user does not need to install it again.
When the communication by the USB to RS-232 converter is not established, change the port setting as
follows;
1. Select My Computer →Properties.
2. Select Device Manager.
To Next Page
Loading...
