PerkinElmer Spotlight 150 User Manual

34 . Spotlight 150 User's Guide
Before Using the Spotlight 150
Before you use the Spotlight 150 you must:
• Make sure the spectrometer is switched on;
• Switch the microscope on;
• Cool the detector (MCT detector versions only);
• Set up the microscope;
• Focus the microscope.
We recommend that you use these procedures at the beginning of the day's work, or any
time the Spotlight 150 has not been in use or has been used by others.

PerkinElmer Spotlight 150 Specifications

General

Type	FT-IR Imaging System
Detector	MCT (Mercury Cadmium Telluride)
Imaging Capability	Yes
Sample Types	Solid, Liquid
Microscope Type	Infrared Microscope
Software	Spectrum IMAGE