EasyManua.ls Logo

Perkins 2206J-E13TA - Additional Messages

Perkins 2206J-E13TA
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Do not operate or work on this equipment unless
you have read and understand the instructions
and warnings in the Operation and Maintenance
Manuals. Failure to follow the instructions or
heed the warnings could result in serious injury
or death.
Sulfuric Acid Burn (2)
Illustration 3 g01382725
One safety message for sulfuric acid burn is located
on top of the exhaust cooler. One safety message for
sulfuric acid burn is located on the right side of the
exhaust cooler.
Sulfuric Acid Burn Hazard may cause serious
personal injury or death.
The exhaust gas cooler may contain a small
amount of sulfuric acid. The use of fuel with sul-
fur levels greater than 15 ppm may increase the
amount of sulfuric acid formed. The sulfuric acid
may spill from the cooler during service of the en-
gine. The sulfuric acid will burn the eyes, skin
and clothing on contact. Always wear the appro-
priate personal protective equipment (PPE) that
is noted on a material safety data sheet (MSDS)
for sulfuric acid. Always follow the directions for
first aid that are noted on a material safety data
sheet (MSDS) for sulfuric acid.
i07676530
Additional Messages
There are several specific messages on this engine.
The exact location of the messages and the
description of the information are reviewed in this
section. Become familiar with all messages.
Make sure that all the messages are legible. Clean
the messages or replace the messages if the
messages are not legible. Replace the illustrations if
the illustrations are not legible. When cleaning the
messages, use a cloth, water, and soap. Do not use
solvent, gasoline, or other harsh chemicals to clean
the messages. Solvents, gasoline, or harsh
chemicals could loosen the adhesive that secures the
messages. Loose adhesive will allow the messages
to fall.
Replace any message that is damaged, or missing. If
a message is attached to a part that is replaced,
install a message on the replacement part.
Replacement labels may be obtained from Perkins
distributors.
Illustration 4 g03422039
Purge notice message
8
SEBU9071-06
Safety Section
Additional Messages

Related product manuals