Safety Section
i04112132
Safety Messages
There may be several specific warning signs on your
engine. The exact location and a description
of the
warning signs are reviewed in this section. Please
become familiar with all warning signs.
Ensure that all of the warning signs are legible. Clean
the warning signs or replace the warning signs if the
words cannot be read or if the illustrations are not
visible. Use a cloth, water, and soap to clean the
warning signs. Do not use solvents, gasoline, or other
harsh chemicals. Solvents, gasoline, or harsh
chemicals could loosen the adhesive that secures the
warning signs. The warning signs that are loosened
could drop of
f the engine.
Replace any warning sign that
is damaged or
missing. If a warning sign is attached to a part of the
engine that is replaced, install a new warning sign on
the replacement part. Your Perkins distributor can
provide new warning signs.
Universal Warning
Do not operate or work on this equipment unless
you have read and understand the instructions
and warnings in the Operation and Maintenance
Manuals. Failure to follow the instructions or heed
the warnings could result in serious injury or
death.
Illustration 1 g01154807
Typical example
The Universal Warning label (1) is located on the top
of the engine, on the engine interface connector
cover.
SEBU8726
5
Safety Section
Safety Messages
To Next Page
Loading...
