Perkins recommends that model-specific cradles are
used to store and transport engines. Supporting
engines on the sump/oil pan is not recommended
under any circumstances. This action is for both
safety and quality reasons.
904J-E36TA Industrial Engine
Equipped With a Balancer
Illustration 35 g06511783
Typical example
(1) Rear lifting eye
(2) Front lifting eye
Use both lifting eyes when lifting engine assembly.
Perkins recommends that model-specific cradles are
used to store and transport engines. Supporting
engines on the sump/oil pan is not recommended
under any circumstances. This action is for both
safety and quality reasons.
904J-E28T and 904J-E28TA
Industrial Engines
Illustration 36 g06458398
Typical example
(1) Rear lifting eye
(2) Front lifting eye
Use both lifting eyes when lifting engine assembly.
Perkins recommends that model-specific cradles are
used to store and transport engines. Supporting
engines on the sump/oil pan is not recommended
under any circumstances. This action is for both
safety and quality reasons.
i07621581
Product Storage
(Engine and Aftertreatment)
Perkins are not responsible for damage which may
occur when an engine is in storage after a period in
service.
40 M0092609-05
Operation Section
Product Storage
To Next Page
Loading...
