3
14 User’s Handbook, TPD 1285E, Issue 2
3.152
How to start a warm engine
1 If the engine is equipped with a manual stop control, ensure that it is in the “run” position.
2 Adjust the engine speed control to the quarter open position.
3 Turn the start key to the “HS” or “S” position (A/B) to engage the starter motor.
4 Allow the start key to return to the “R” position, as soon as the engine starts.
A
0
R
H
H
S
B
0
R
S
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
