Pessl Instruments iMETOS - Remote Reset

iMETOS Maintenance & troubleshooting 13
3. Now press Y to conrm the operation, and wait some time until the operation is nished (the gray text is
coppied from the last step).
4. When it is nished, the menu entries should be shown again (the gray text is coppied from the last step)
5. Done, now the jumper may be removed and the station reset
11.3 Remote reset
In order to erase the memory and sensor conguration you can send a station reset via SMS.
Notes:
• You need the phone number associated to the SIM card in the iMETOS 3.3
• Alternatively, to send the SMS to the SIM card at the iMETOS 3.3 you can use a SIM card which already has
the conguration SMS locally stored.
• After sending the SMS described below in this section press the connect button in the iMETOS so it checks
for received SMS, otherwise it will be checked at midnight.
The following string will be sent: