iMETOS Maintenance & troubleshooting 2
Table of Content
1. POWER SUPPLY 3
1.1. Maintenance 3
1.2 Troubleshooting 3
2. COMMUNICATION 4
2.1 Troubleshooting 4
3. RAIN GAUGE 5
3.1 Maintenance 5
3.2 Troubleshooting 5
4. LEAF WETNESS SENSOR 6
4.1 Maintenance 6
4.2 Troubleshooting 6
5. TEMPERATURE AND RELATIVE HUMIDTY SENSOR 7
5.1 Maintenance 7
5.2 Troubleshooting 7
6. SOIL TEMPERATURE SENSOR 8
6.1 Maintenance 8
6.2 Troubleshooting 8
7. GLOBAL RADIATION SENSOR 8
7.1 Maintenance 8
7.2 Troubleshooting 8
8. WIND SPEED AND DIRECTION SENSOR 8
9. PI-Bus 9
10. RADIONODE TROUBLESHOOTING 9
10.1 Reset the WSN 9
10.2 Connection Recovery During Running 10
10.3 Connection Recovery After Power On 10
10.4 Terminal menu info about AP board 10
11. STATION NOT SENDING DATA – USE TERMINAL MODE 11
11.1 How to get the data already stored in the station through TeraTerm 11
11.2 Erasing sensor conguration and records 12
11.3 Remote reset 13
11.4 Sensor test and send data manually 14
To Next Page
Loading...
