PREVENTIVE MAINTENANCE SCHEDULE PART 8: MAINTENANCE AND SERVICE
– 132 – Y53-6007 (R10/06)
Tires &
Wheels
Tires Check inflation pressure (see page 156). Weekly “cold” using cali-
brated gauge
Tires Inspect for cuts, irregular wear, missing lugs, sidewall damage, etc. X
Disc wheels Inspect the wheel disc for any cracks or surface irregularities. Inspect the
rim edge and bead seat area for damage. Replace any damaged wheels -
DO NOT ATTEMPT TO REPAIR.
X
Demountable rims Inspect the mounting ring, rim gutter, side ring, and lock ring for damage;
replace as required.
X
Wheel nuts and studs Check the tightness of the fasteners and tighten the fasteners to the speci-
fied torque as required (see page 164).
X
Wheel nuts and studs Inspect for damaged hex corners, stripped or damaged threads, and
excessive corrosion; clean or replace as required.
X
Power
Steering
Reservoir Check the fluid level (see page 150). X
Reservoir (ON HIGHWAY) Drain, replace the filter, and refill (see page 150). X X
Reservoir (OFF HIGHWAY) Drain, replace the filter, and refill (see page 150). X X
Steering gear Check the lash of the sector shaft; adjust as required. X
Table 2 Preventative Maintenance Schedule (Continued)
SYSTEM COMPONENT MAINTENANCE TASK
Recommended
PM Interval
I ABCDE
To Next Page
Loading...
