PREVENTIVE MAINTENANCE SCHEDULE PART 8: MAINTENANCE AND SERVICE
– 136 – Y53-6007 (R10/06)
Battery
Boxes, Tool
Boxes, and
Steps
Battery cables Check the condition of the cables, cushion clamps, and routing. Replace a
cushion clamp if the rubber has deteriorated. Repair or tighten terminals,
and secure cables to prevent chafing. Replace damaged cables (cuts,
cracks, or excessive wear) (see
page 174).
X X
Batteries Check for cracks and damage, electrolyte level, condition of terminals, and
tightness of holddowns (see
page 174).
X
Battery box and tray Check the box integrity. Clean the drain tube and check for acid leaks.
Check condition of all equipment mounted under the box.
X
Table 2 Preventative Maintenance Schedule (Continued)
SYSTEM COMPONENT MAINTENANCE TASK
Recommended
PM Interval
I ABCDE
To Next Page
Loading...
