PART 4: CONTROLS AND DISPLAYS GAUGES
(R10/06) Y53-6007 – 41 –
NOTE: Neither the odometer nor the hourmeter
can be reset.
1. Turn the ignition switch to ON.
2. Choose the desired function.
3. Set or reset the function:
• Trip Odometers: Press and hold the Reset switch
until the mileage is reset to zero; this will take about
3 seconds.
• Clock
a. Press & release the Reset switch; the hours
digit will flash.
b. Press & hold the Select switch; the hours dig-
its will increase until the switch is released.
Scroll through 12 hours to change between
A.M. and P.M.
c. Press & release the Reset switch; the hours
digits will stop flashing, and the minutes digits
will begin to flash.
d. Press & hold the Select switch; the minutes
digits will increase until the switch is released.
e. Press & release the Reset switch; the min-
utes digits will stop flashing. The clock is now
set.
• Clock Alarm
a. Press & release the Reset switch; the hours
digit will flash.
b. Press & hold the Select switch; the hours dig-
its will increase until the switch is released.
Scroll through 12 hours to change between
A.M. and P.M.
c. Press & release the Reset switch; the hours
digits will stop flashing, and the minutes digits
will begin to flash.
d. Press & hold the Select switch; the minutes
digits will increase until the switch is released.
e. Press & release the Reset switch; the min-
utes digits will stop flashing. The alarm is now
set and activated (the “*” symbol will show in
the clock display to indicate this).
– To turn the alarm OFF or ON, press &
hold the Select switch for 3 seconds while
viewing any display.
To Next Page
Loading...
