18
DEVICE OVERVIEW
Power/Batteries: petMAP+II is equipped with 4 rechargeable AA NiMH batteries (factory installed)
and an external wall outlet plug-in AC/DC adapter. (Note: remove the green plastic tag at the battery
cover to activate the batteries before attempting first use.) The AC/DC adapter can operate the unit
while charging the batteries and may be left charging continuously.
The petMAP+II may also operate on 4 AA alkaline or lithium batteries (these are non-rechargeable
battery types); however, the AC/DC adapter should never be used when using batteries other than
NiMH rechargeable batteries. (See WARNINGS)
The petMAP+II AC/DC adapter is equipped with standard North America/Japan blades. If purchased,
accessories exist to configure the AC/DC adapter for plug compatibility to several international options.
To exchange the plug, simply press the round, spring-loaded button, twist and remove the plug supplied
and replace it with the appropriate one for local use. (See instructions which accompany the
International Adaptor Plugs, Code 9008.)
To Next Page
Loading...