EasyManua.ls Logo

PEUGEOT JETForce - Maintenance and Fuel Gauge

PEUGEOT JETForce
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUMENT CLUSTER
TRAINING MANUAL: JET FORCE Page : 39/43
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Maintenance reset
Every 5000 km a « spanner » symbol appears informing the rider that his machine is due for service
After servicing the machine, erase the symbol as follows:
- Ignition off
- Press button and hold down
-Turn on the ignition (only the spanner appears and flashes)
- Press for >5s to erase the symbol
Fuel gauge self-diagnostic
If the fuel system is cut off from the fuel gauge, when the ignition is turned on, the 8 LEDs light one after
the other
Gauge functioning (8s timer)
8 LEDs represent a full tank (10 ohms)
2 LEDs flash (75 ohms)
1 LED flashes (98 ohms)
8 LEDs flash (R> 87 ohms) means an empty tank

Table of Contents

PEUGEOT JETForce - Maintenance and Fuel Gauge