Pfaff 1295 - Pedal (on Machines with Subclass -917;97); Knee Lever 1

Controls
7 - 2
Fig. 7 - 04
Fig. 7 - 03
0
+1
-1
-2
1
7.04 Knee lever (on machines without subclass -911/97)
● The presesr foot is raised by pressing
knee lever 1.
7.03 Pedal (on machines with subclass -911/97)
0 = Neutral position
+1 = Sewing
-1 = Raise presser foot
-2 = Thread trimming (on machines with
thread trimmer)